Railroad anchor is also called rail anchor, or railroad tie anchor. It is placed under the rail bottoms and clamp the rails with its curved design. Its side is pressed against the sleeper. The rail anchors are made in one piece from spring steel which can fasten the rails by providing friction, elasticity, and locking action
Rail tie anchors are applied to the rail base directly and lodge up against the tie. Rail anchors provide a large bearing surface against rail base and railroad tie, preventing cutting and wear, and eventually to prolong the working life of the railroad ties. Anchors are made for a specific rail weight and base width, which can be classified into two types: the Drive-on rail anchors and Spring type rail anchor.
Rail anchors are always used in rails such as 50kg, 85kg, UIC54, UIC60, 90/91lb, 115RE, 136RE, just to name a few. GNEE RAIL can produce T or V-shaped rail anchors as well as other types according to clients' requirements, by forging or casting.
Rail anchors specifications
| Type | Used in 50Kg, 85Kg,90/91LB, 115RE /136RE ,UIC54 & UIC60 rail, or other types upon customers' drawings. | ||
| Material | 60Si2MnA | 45# | QT500-7 |
| Chemical composition(%) | C:3.60-3.80, Mn:≤0.6, Si:2.50-2.90, P:≤0.08, S:≤0.025 | ||
| C:0.56-0.64, Mn:0.60-0.90, Si:1.60-2.00, Cr:≤0.35, P:≤0.03, S:≤0.03 | C:0.42-0.50, Mn:0.50-0.80, Si:0.17-0.37, Cr:≤0.25, P:≤0.035, S:≤0.035 | ||
| Surface | plain (oiled),color painting, zinc painted or HDG | ||
| Standard | AS1085.10-20002 , DIN, ISO-9001 | ||
Generally speaking, based on our former production experience, most common material for rail anchor production is 60Si2MnA, which is often used for rails such as 50kg, 70lb, 80lb, 90/91lb and so on.
| Type | Material | Weight(g/pc) |
| 50Kg | 60Si2MnA | 800 |
| 70LB | 60Si2MnA | 800 |
| 85LB | 60Si2MnA | 800 |
| 90/91LB | 60Si2MnA | 800 |
