Railway Screw Spikes - Cross-Regional Standard Comparison & Environmental Adaptation
|
Regional Standard |
Model |
Thread Type |
Operating Environment Adaptability |
Key Performance Indicators |
Matching Rail (kg/m) |
Sleeper Compatibility |
Service Life (Years) |
|
GB/T 12611 (China) |
SS-C22×140 |
Metric Fine (M22×2.5) |
High humidity (≤90% RH), -40℃~75℃ |
Corrosion resistance: ≥500h (salt spray); Torque retention: ≥80% (1 year) |
50–60 |
High-strength concrete, composite |
12–15 |
|
AREMA (USA) |
SS-U24×150 |
UNC Coarse (3/4"-10) |
High temperature (≤85℃), desert/salt marsh |
Corrosion resistance: ≥400h (salt spray); Fatigue life: ≥1.2×10⁶ cycles |
60–75 |
Pressure-treated wood, concrete |
10–13 |
|
BS EN 13481 (EU) |
SS-E20×130 |
Metric Coarse (M20×3) |
Moderate humidity (≤80% RH), -30℃~70℃ |
Corrosion resistance: ≥550h (salt spray); Thread wear resistance: ≤0.1mm (100 installations) |
43–50 |
Anti-corrosion wood, precast concrete |
11–14 |
|
JIS E 2015 (Japan) |
SS-J21×135 |
Metric Fine (M21×2) |
Coastal high-salt (Cl⁻≤500mg/m³), -35℃~80℃ |
Corrosion resistance: ≥600h (salt spray); Impact toughness: ≥55J (-20℃) |
50–60 |
Fiber-reinforced plastic, concrete |
13–16 |
|
UIC 864 (Int'l) |
SS-I23×145 |
Metric Coarse (M23×3) |
Universal (urban/suburban), -40℃~75℃ |
Corrosion resistance: ≥520h (salt spray); Tensile strength: ≥900MPa |
43–60 |
Wood, concrete, composite |
12–15 |
Railway Screw Spikes - Installation Failure Troubleshooting & Maintenance Plan
|
Installation Failure Type |
Typical Cause |
Identification Method |
Troubleshooting Measure |
Maintenance Interval |
Preventive Measure |
|
Thread Stripping |
1. Sleeper pre-drilled hole diameter mismatch; 2. Over-torque during installation |
1. Visual inspection (thread deformation); 2. Torque test (no torque increase) |
1. Replace with larger-diameter screw (e.g., M24→M27); 2. Repair sleeper hole with resin anchor |
After troubleshooting, recheck in 1 month |
1. Verify hole diameter (match thread size); 2. Use torque wrench with torque limit |
|
Screw Loosening |
1. Vibration (high-speed/heavy-haul); 2. Coating wear (loss of friction) |
1. Torque check (torque below standard); 2. Visual inspection (gap between head and sleeper) |
1. Retighten to standard torque; 2. Add anti-loosening washer (spring washer) |
1. High-speed rail: Monthly; 2. Freight rail: Quarterly |
1. Select anti-vibration thread design; 2. Use high-friction coating |
|
Head Fracture |
1. Material defect (inclusion); 2. Impact during installation (hammer hit) |
1. Ultrasonic flaw detection (internal crack); 2. Visual inspection (fracture at head-shank junction) |
1. Replace with new screw (same model); 2. Inspect batch for defects |
After replacement, check in 2 weeks |
1. Batch ultrasonic inspection before installation; 2. Use proper installation tool (avoid hammer) |
|
Corrosion-Induced Seizure |
1. High humidity/salt (coastal); 2. Lack of maintenance (no anti-rust treatment) |
1. Visual inspection (rust on thread); 2. Disassembly test (cannot unscrew) |
1. Apply anti-rust penetrant (soak 2–4h); 2. Replace severely corroded screws |
1. Coastal: Monthly; 2. Inland: Bi-monthly |
1. Select high-corrosion-resistance coating (zinc-aluminum); 2. Regular anti-rust oiling |
GNEE RAILWAY-professional supplier


Hot Tags: fastening system rails screw spikes, China fastening system rails screw spikes manufacturers, suppliers, factory, strong rail spikes, maintenance free rail spikes, railway spikes production, rail spikes factory, long lasting rail spikes, installation friendly rail spikes













