Railway Fish Plates - Technical Specifications & Standards
Introduction: A fish plate, also known as a splice bar or joint bar, is a metal plate bolted to the sides of two rail ends to form a butt joint. The following table outlines key technical aspects of various types of fish plates.
| Specification | Description / Common Standards |
|---|---|
| Joggled Fish Plate | - Features a bent or "joggled" section to create a recess for the rail head. - Provides better support and restraint for the rail head compared to flat plates. |
| Standard Fish Plate | - Used for joining two rails of identical section and wear profile. - The most common type used in continuous welded rail (CWR) sections where joints are minimal. |
Comparison Table: Standard vs. Compromise Fish Plate
This table directly compares the two main types for clarity.
| Feature | Standard Fish Plate | Compromise Fish Plate |
|---|---|---|
| Purpose | Joining identical rail sections. | Joining different rail sections. |
| Design Symmetry | Symmetrical; both sides have the same profile. | Asymmetrical; each side is machined to match a different rail profile. |
| Application | Main tracks, sidings, wherever rail sections are uniform. | Transition zones between tracks with different rail weights, special turnouts. |
| Complexity & Cost | Relatively simple and standard. | More complex design and manufacturing, typically more expensive. |
| Joint Strength | Optimal, as it provides full bearing surface. | Slightly weaker than a standard joint due to the g |
GNEE RAILWAY-professional supplier


Hot Tags: railway fastening rail fish plate, China railway fastening rail fish plate manufacturers, suppliers, factory, Rail Joints, asce 60 rail dimensions, Compromise Joint Bar, asce 85 rail dimensions, compromise joint bar types, Insultated Rail Joint












