The 60 lbs rail, commonly referred to by its section designation ASCE 60, is a standard T-section rail primarily used for industrial crane runways and light railway lines. This specific profile is defined by the American Society of Civil Engineers (ASCE) and is a benchmark for light-duty track systems.
As a leading manufacturer, GNEE RAIL control the entire production process from billet to finished rail, ensuring that every meter of ASCE 60 rail we supply meets strict tolerances for hardness, straightness, and chemical composition.
What are the specific 60 lbs rail dimensions in mm?
The 60 lbs ASCE rail (60 lb/yd) dimensions are generally: 107.95 mm height, 107.95 mm base width, 60.32 mm head width, and 12.3 mm web thickness. This American Standard railroad rail (ASCE 60) weighs approximately 27.6kg/m.
asce 60 rail dimensions:
- Height (A): 117.48 mm
- Bottom Width (B): 114.30 mm
- Head Width (C): 60.33 mm
- Web Thickness (D): 11.11 mm
- Head Thickness (E): 28.58 mm
| Size | Head (mm) | Height (mm) | Base (mm) | Web (mm) | Nominal weight (kg/m) | Material | Length (m) |
|---|---|---|---|---|---|---|---|
| ASCE 25 | 38.1 | 69.85 | 69.85 | 7.54 | 12.4 | 700 | 6-12 |
| ASCE 30 | 42.86 | 79.38 | 79.38 | 8.33 | 14.88 | 700 | 6-12 |
| ASCE 40 | 47.62 | 88.9 | 88.9 | 9.92 | 19.84 | 700 | 6-12 |
| ASCE 50 | 54 | 98.4 | 98.4 | 11.11 | 24.855 | 700 | 6-12 |
| ASCE 60 | 60.32 | 107.95 | 107.95 | 12.3 | 29.76 | 700 | 6-12 |
| ASCE 75 | 62.71 | 122.24 | 122.24 | 13.49 | 37.2 | 900A/1100 | 12-25 |
| ASCE 85 | 65.09 | 131.76 | 131.76 | 14.29 | 42.17 | 900A/1100 | 12-25 |
60 lbs rail weight per meter
Weight is a crucial factor for logistics and structural load calculations. While the nominal weight is 60 lbs per yard, the precise 60 lbs rail weight per meter is approximately 29.76 kg/m. This weight conversion is vital for international shipping calculations and for determining the load-bearing capacity of the supporting crane beams. At GNEE RAIL, we provide detailed mill certificates with every shipment, confirming both the weight per meter and the chemical composition of the steel.
Material Standards and Chemical Composition of rail asce 60
Beyond the asce 60 rail dimensions, the material grade determines the service life of the rail. For industrial applications such as overhead cranes in steel mills or ports, the rail typically adheres to standards like ASTM A759 (Carbon Steel) or higher-grade options. The steel must have a specific carbon content to withstand the wheel loads without deforming. We ensure that our rail asce 60 products are rolled from high-quality carbon manganese steel, offering excellent wear resistance and impact strength suitable for demanding environments.
| Mechanical Property | Chemical Composition (%) | |||||||||||||
| U71Mn | Yield strength | Tensile strength | Elongation | Hardness | C | Si | Mn | S | P | Cr | Ni | Cu | ||
| MPa | kg/mm² | MPa | kg/mm² | min | HBW | |||||||||
| ≥390 | ≥40 | ≥880 | 9% | 0.65-0.76 | 0.15-0.35 | 1.10-1.40 | ≤0.030 | ≤0.030 | ≤0.250 | ≤0.250 | ≤0.250 | |||
| Q235B | Mechanical property | Chemical composition(%) | |||||||||
| Yield strength | Tensile strength | Elongation | Hardness | C | Si | Mn | S | P | |||
| MPa | kg/mm² | MPa | kg/mm² | min | HB | ≤ | ≤ | ≤ | |||
| ≥ | ≥ | ||||||||||
| 235 | 24 | 375-460 | 38-47 | 26% | 0.12-0.22 | 0.35 | 0.30-0.70 | 0.045 | 0.045 | ||
| 55Q | Mechanical property | Chemical composition(%) | |||||||||
| Yield strength | Tensile strength | Elongation | Hardness | C | Si | Mn | S | P | |||
| MPa | kg/mm² | MPa | kg/mm² | min | HBW | ≤ | ≤ | ||||
| ≥ | ≥ | ≥ | ≥ | ≥ | |||||||
| 685 | 69 | 197 | 0.50-0.60 | 0.15-0.35 | 0.60-0.90 | 0.04 | 0.04 | ||||
Frequently Asked Questions (FAQ)
Q1: What is the tolerance range for the 60 lbs rail dimensions in mm during production?
A: In accordance with international standards like ASTM A759, the rolling tolerance for asce 60 rail dimensions is typically within +0.5mm for the height and base width. We maintain strict internal controls to ensure consistency, allowing for seamless splicing of rail ends on site without causing impact damage to crane wheels.
Q2: Can I use standard clips for the ASCE 60 rail if I buy from GNEE RAIL?
A: Yes, because we strictly adhere to the standard asce 60 rail dimensions. This ensures that our rail is fully compatible with industry-standard clips, tie plates, and pads. However, if you have custom drilling or fabrication needs, we offer machining services to ensure the track components fit perfectly before the rail leaves our facility.
Q3: What is the maximum length available for the 60 lbs rail to reduce on-site welding?
A: To minimize the number of field welds and reduce installation costs, we can supply the 60 lbs rail in lengths ranging from 12 meters to 18 meters, depending on shipping container constraints. Longer lengths reduce joint frequency, which is a major factor in extending the lifespan of industrial crane tracks.
Q4: Is the ASCE 60 rail suitable for high-temperature environments like steel mills?
A: Standard carbon steel rail asce 60 performs well in general conditions. For steel mill applications with high ambient temperatures, we recommend discussing your specific thermal expansion requirements with us. As a manufacturer, we can offer alternative steel grades or provide technical data on thermal expansion coefficients for the 60 lbs rail weight per meter calculations.
At GNEE RAIL, we manufacture ASCE 60 rail to ASTM A1 and AREMA standards. Every rail we deliver comes with full dimensional verification, material traceability, and the backing of a manufacturing team that understands industrial track applications. Contact our technical team with your project specifications.
