E Clip Rail Fastening System Specifications:
The E-Clip System is typically produced from 20mm bar, generates up to 1,250kgf nominal toe load and has been widely adopted for heavy haul axles up to 40 tonnes. GNEE RAIL give professional advice on choosing pad and insulator materials, due to influence of environmental and operating conditions. Generally HDPE, TPE or PU is preferred material for high axle loads application.
| Part name | E clip | Shoulder | Rail pad | Insulator | |||||
| Quantity | 2 | 2 | 1 | 2 | |||||
| Type | Dia. 16mmDia. 18mmDia. 20mm | UIC54,UIC60, 115RE,50kg rail, 60kg rail,BS80lbs,BS100lbs and size as customer required. | |||||||
| Material | 60Si2MnA, 60Si2CrA,55SiMn | QT500-7 QT450-10 | HDPE, EVA, or rubber | Reinforced Nylon 66 (PA66) | |||||
| Finish | Plain oiled, color painting, or the other custom finish | Plain oiled, color painting | Black or other colors | Black, blue, yellow, green or other colors | |||||
N Clip Rail Fastening System
N Fastening System is widely used in European and Africa countries for railway construction. It is compliant with EN13481-5 standard. The N fastening system consists the following items: N Clip: The N Clip is made up of alloy spring steel according to NF F50-015 standard Insulator: This insulator is specially designed for the N Clip, we also call it support pad; High strength double end screw spike with nut and washer.
| Part name | Quantity | Type | Material | Finish | Remark |
|---|---|---|---|---|---|
| N clip | 2 | Thickness 4mm or 4.5mm | 60Si2MnA, 60Si2CrA | Plain oiled, red color painting, or the other required by customers | Hardness: 42-47HRCFatigue |
| life: 3 millions cycles without breaking | |||||
| Standard: DIN17221, GB/T1222 | |||||
| Insulator | 2 | UIC54, UIC60, S49 rails | Reinforced Nylon 66 (PA66) | Black, blue, yellow, green or other colors | Different designs are available. |
| Double end screw spike | 2 | UIC54, UIC60, 50kg rail, 60kg rail | Grade 5.6: 35# | Plain oiled, black oxide, galvanized, hot dip galvanized | Bending at 30 degree without crack. |
| Special spring washer | 2 | 18.25×34×78mm | ML08Al | For protecting the thread of the double end screw spike | |
| Hex nut | 2 | As ordered | Grade 5: 35# | Standard: DIN985 | |
| Plain washer | 2 | As ordered | Q235 | Standard: DIN125 |
SKL Clip Rail Fastening System
SKL Rail Fastening System meet all the requirements of Tram line and general line and turnout area. Sleeper is not needed with top-down construction method. It is feasible in open track, also in embedded track. Easy installation, Gauge adjustment (+/-10mm), height regulation (+20mm), static stiffness (>30KN/mm), different stiffness of rail pads will be supplied according customer requirement.
|
Type |
SKL 1 Rail Clip |
SKL 3 Rail Clip |
SKL 12 Rail Clip |
SKL 14 Rail Clip |
|
Secification |
ø13 |
ø13 |
ø13 |
ø14 |
|
Hardness |
42-47HRC |
42-47HRC |
42-47HRC |
42-47HRC |
|
Weight(kg) |
0.49 |
0.53 |
0.53 |
0.505 |
KPO Clamp Rail Fastening System
KPO rail fastening system is made up of Baseplate, Clamping plate, Clip bolt, Sleeper screw, Spring washer, baseplate size varies for different rail sections. KPO clamp rail fastening system can suit various rail track such as UIC54, UIC60, 50KG, 60KG, S49. It is very popular in the Europe market.
| Part name | Quantity | Type | Material | Finish | Remark |
|---|---|---|---|---|---|
| KPO clip | 2 | KPO3, KPO6, KPO9 | Q235 | Plain oiled | Standard: DIN5906 |
| HS bolt | 4 | HS26, HS32 | Grade4.6: Q235 | Plain oiled, black oxide, galvanized, hot dip galvanized | Diameter: 22mm or 24mm. |
| Grade5.6: 35# | Length: 55mm, 65mm, 75mm, 90mm | ||||
| Grade8.8: 45# | Standard: UIC864-2 | ||||
| Hex nut | 2 | As ordered | Grade 5: 35# | Standard: DIN985 | |
| Grade 8: 45# | |||||
| Double coil spring washer | 2 | As ordered | 65Mn | Standard: UIC864-3 | |
| screw spike | 2 | M24×150mm | Grade 4.6: Q235 | Plain oiled, black oxide, galvanized, hot dip galvanized, Dacromet and sherardized. | Standard: ISO898-1, UIC864-1 and NF F500-50 |
| M24 ×160mm | Grade 5.6: 35# | ||||
| M24 ×180mm | Grade 8.8: 45# | ||||
| or other length as ordered | |||||
| Base plate | 1 | UIC54,UIC60, 50kg rail, 60kg rail,S49 in ordered size | Casting iron QT500-7, QT450-10, or forging low carbon steel or high carbon steel | Plain oiled | Standard: UIC864-6 |
GNEE RAIL have a complete production line and a professional technical team. We can customize railway spring clips of different specifications according to customer needs to ensure accurate size and stable performance.
