C45 and C46 Galvanized Coach Screw Spikes for Concrete Sleepers

Oct 28, 2025 Leave a message

Coach Screw Spikes in Concrete Sleeper Track

Railway screw spikes are commonly used to fasten railway sleepers or railroad ties, and they can also be used in combination with plastic ferrules and cast into concrete sleepers. Depending on specific geographical requirements, railway spiral spikes can vary in thread profile, length, diameter, and drive head. The coach screw spike, with its coarse thread and square or hexagonal head, is one of the most widely used types for concrete sleeper railways.

C45 and C46 Steel Characteristics

Both C45 and C46 are high-quality medium carbon steels. C45 steel, with a carbon content of about 0.45 percent, provides a balance of strength and toughness, making it ideal for components subject to impact and torque. C46 steel, with a slightly higher carbon content, offers enhanced tensile strength suitable for heavy-load and high-speed railways. After hot forging and quenching-tempering treatment, these materials can reach mechanical grades from 5.6 to 8.8, effectively resisting vibration and fatigue stresses in track systems.

Heat Treatment and Mechanical Grades

The hot forging process forms the thread and head in one operation, which preserves the grain flow of the steel and improves fatigue resistance. Quenching and tempering then adjust the hardness and toughness to the required level. Grade 5.6 provides a tensile strength of at least 500 MPa and a yield strength of at least 300 MPa, while grade 8.8 provides a tensile strength of at least 800 MPa and a yield strength of at least 640 MPa. All grades must pass a 90 degree cold bending test without cracking.

Specification Range

Coach screw spikes are available with a coarse thread design, lengths from 65 mm to 200 mm or more, and shank diameters from 12 mm to 24 mm. The head can be hexagonal or square, and a flange or square neck is available for specific fastening systems. Standard materials include Q195 and Q235 carbon steel for lower grades and stainless steel for corrosion-critical applications, with hot-dip galvanizing or zinc plating as the standard coating.

Galvanized Surface Protection

Hot-dip galvanizing provides a thick zinc layer that protects the spike in wet, coastal, and tunnel environments, while zinc plating gives a thinner coating for less aggressive conditions. The galvanized surface is also compatible with plastic ferrules in concrete sleepers, preventing corrosion products from damaging the concrete. Surface quality is controlled by coating thickness measurement and adhesion testing before delivery.

Frequently Asked Questions

What is the difference between C45 and C46 steel? C45 has a carbon content of about 0.45 percent, while C46 has a slightly higher carbon content and higher tensile strength.

What grades can be reached after heat treatment? after hot forging and quenching-tempering, grades from 5.6 to 8.8 are typically achieved.

What size range is available for coach screw spikes? Lengths range from 65 mm to 200 mm or more, with shank diameters from 12 mm to 24 mm.

Why is hot-dip galvanizing used? It provides a thick zinc layer that resists corrosion in wet, coastal, and tunnel environments.

Can coach screw spikes be customized? Yes, dimensions, thread profiles, and head types can be manufactured according to customer drawings and samples.