The difference between crane rails and tracks
1. Crane rails
Crane rails are the support and guide structure during the operation of the crane. They are installed above the crane and suspended on the track of the crane's lifting part. Since crane rails are usually used for heavy lifting systems, their load-bearing capacity is relatively high.
On the other hand, crane rails are made according to the design of the crane. This means that in the case of a more universal crane, only the rails need to be replaced to adapt to different object lifting needs. Therefore, the standardization of crane rails is relatively low.
2. Tracks
Tracks are a railway structure that is generally fixed on the ground or underground and is used for the travel of railway vehicles, such as subways and trains. Unlike crane rails, tracks are composed of many main components, such as sleepers, rails, clips, track bolts, etc. The track system needs to bear a lot of weight and mechanical loads, so strict design standards and construction requirements are required.

Compared with crane rails, tracks are more standardized. Due to the high standardization and popularity of railway transportation systems, the manufacture and installation of tracks are repeatable and standardized. In addition, the track system usually requires some additional work, such as foundation treatment, track laying, construction prestressing and testing.
In general, although crane rails and tracks have support and guiding functions, their uses, structures and degree of standardization are different. Crane rails are usually used in heavy lifting systems, while tracks are used for the travel of railway vehicles. The two have different characteristics and application scenarios.







