60E1 rail, universally known as UIC60, is the dominant rail profile on European high-speed and heavy-freight lines and is now used on metro, tram and mainline projects worldwide. The following overview covers the complete specification of the 60E1 profile and the steel grades available for it.
What Is 60E1 (UIC60) Rail
60E1 is the flat-bottom Vignole rail section defined in EN 13674-1, with a nominal mass of about 60 kg/m. The profile is descended from the UIC60 section defined in UIC 860, and the two names are used interchangeably in practice because the dimensional envelopes are compatible. The heavy head and wide foot give the section high bending stiffness and good resistance to head wear, making it suitable for high-speed passenger traffic, heavy freight and urban rail alike.
60E1 Rail Dimensions and Section Properties
| Parameter | Value |
|---|---|
| Section designation | 60E1 (UIC60) |
| Governing standards | EN 13674-1, UIC 860 |
| Rail height | 172.00 mm |
| Bottom width | 150.00 mm |
| Head width | 72.00 mm |
| Web thickness | 16.50 mm |
| Nominal mass | 60.21 kg/m per EN 13674-1; 60.34 kg/m per UIC 860 |
For comparison, the lighter European sections in the same family include 54E3 at about 54.57 kg/m, 55E1 at about 56.03 kg/m and 56E1 at about 56.30 kg/m. The 60E1 section is the heaviest of the common European mainline profiles and is the default choice for new high-speed and heavy-haul lines.
Steel Grades for 60E1 Rail
EN 13674-1 defines rail steel grades by hardness number, and the grade is selected according to traffic conditions. R260 offers a minimum tensile strength of about 880 MPa and is the standard grade for mixed-traffic lines. R350 offers about 1175 MPa for demanding lines, and R350HT is a head-hardened grade with a hardness of 350 to 390 HBW and the same high minimum tensile strength, giving the best wear resistance on curves and high-speed sections. The grade is stamped in the rail web and must be confirmed against the mill certificate before acceptance.
| Grade | Minimum tensile strength | Typical use |
|---|---|---|
| R260 | about 880 MPa | General mixed-traffic lines |
| R350 | about 1175 MPa | High-density lines and curves |
| R350HT | about 1175 MPa | Curves, heavy-haul and high-speed lines |
60E1 versus UIC60: What Is the Difference
UIC60 was originally defined in UIC 860, the older European specification, while 60E1 is the same profile codified in EN 13674-1. The external dimensions are essentially identical: 172 mm height, 150 mm foot width and 72 mm head width. The nominal mass differs slightly, 60.34 kg/m against 60.21 kg/m, because the two standards calculate the theoretical section area in different ways. For new procurement, reference EN 13674-1 directly; for legacy drawings and existing track, the UIC60 designation remains common and is fully compatible.
Typical Applications
60E1 rail is used on high-speed passenger lines with speeds above 200 km/h, on heavy-freight corridors, in metro and suburban networks, on ballastless slab track, and in turnouts and crossings where a robust head is needed. Because the section is standardized across Europe, components such as fishplates, elastic clips, shoulders and rail pads are widely available, and maintenance machinery and welding procedures are well established.
Frequently Asked Questions
Is 60E1 the same as UIC60? Yes in practice. 60E1 is the EN 13674-1 designation of the same profile that UIC 860 calls UIC60, and the external dimensions are compatible.
How much does 60E1 rail weigh? The nominal mass is about 60 kg/m, calculated as 60.21 kg/m per EN 13674-1 and 60.34 kg/m per UIC 860.
What steel grade is best for curves? ahead-hardened grade such as R350HT is preferred for sharp curves because the higher hardness reduces head wear and extends rail life.
Can 60E1 rail be used for metro lines? Yes. 60E1 is widely used on metro and suburban lines because the robust profile suits frequent stops, heavy acceleration and high passenger loads.
Which standard governs 60E1 rail today? EN 13674-1 is the governing standard for the 60E1 section and its steel grades; UIC 860 remains the reference for the older UIC60 designation.






