German Standard Rail A150
1. Dimensions
German standard rail A150 is a high-quality rail steel manufactured according to German standards; its dimensions and structural characteristics are mainly based on the EN 13674 standard. Dimensions include rail height of 150 mm, bottom width of 220 mm, head width of 150 mm and web thickness of 80 mm.
These dimensions ensure the stability and load-bearing capacity of the rails in various railway application scenarios. Confirm exact profile values against the standard edition at ordering.
2. Chemical Composition (Per EN 13674, Verify by Grade)
| C | Si | Mn | P | S |
|---|---|---|---|---|
| 0.48-0.55% | ≤0.20% | 0.70-1.00% | ≤0.025% | ≤0.025% |
This composition improves strength, hardness and toughness to meet stringent railway requirements.
3. Mechanical Properties
- Tensile strength: ≥685 MPa
- Yield strength: ≥490 MPa
- Elongation: ≥16%
Good impact toughness for heavy loads and complex stresses
4. Dimensional and Surface Quality
Dimensional accuracy complies with EN 13674: straightness, twisting and flatness are controlled within allowable tolerances to ensure installation and use. Surface quality meets standard requirements, without obvious defects and cracks.
5. Applications
A150 is suitable for the construction and maintenance of transportation facilities such as railways, subways, ports and airports.
Request A150 Rail Specifications & Pricing
DIN 536 A150 crane rail is designed for heavy-duty crane runway applications, where high load capacity, dimensional accuracy, and wear resistance are required. Correct profile, material grade, and fastening components should be selected according to the crane system and operating conditions. GNEE RAILWAY RAILWAYL supplies A150 crane rails and compatible fastening components for industrial projects.
