How to maintain the long-term durability of rail pads?
A rail pad is inserted in between the rail and baseplate or sleeper. Rail pad is introduced to the railway fastening system because of its resilience or viscoelasticity which can be implemented in the intervention of fatigue cracking of sleepers. The dynamic stress from the wheel or rail impact from both regular and irregular movements is attenuated.
To maintain long-term rail pad durability, implement strict inspection schedules, ensure proper installation alignment, protect against harsh environments (water, extreme temps), use advanced materials like cork-rubber composites, and follow strict replacement guidelines (e.g., 20% compression) to prevent instability and extend track life.
Maintenance Strategies
- Inspection: Conduct regular, thorough visual and mechanical checks for abrasions, cracks, and material degradation, especially in extreme conditions like humid or cold areas.
- Material Choice: Opt for high-performance materials like polyurethane or cork-rubber composites, which resist environmental stress and fatigue better than standard rubber.
| EVA: Polyethylene 80%, Vinyl Acetate 20%. | |||
| Technical Parameter | Unit | Technical Requirement | Value |
| Density | g/cm3 | 0.95-0.98 | 0.95 |
| Tensile Strength | Mpa | ≥15 | 16 |
| Elongation | % | >500 | 550 |
| Melting Point | ℃ | 170-190 | 170 |
| Insulation Resistance | Ω | ≥1×1010 | 5.0 ×1010 |
| Hardness | A | ≥90 | 92(A) |
| HDPE Rail Pad | |||
| Technical Parameter | Unit | Technical Requirement | Value |
| Density | g/cm3 | 0.95-0.98 | 0.95 |
| Tensile Strength | Mpa | ≥19 | 19 |
| Elongation | % | >80 | 150 |
| Melting Point | ℃ | 170-190 | 190 |
| Insulation Resistance | Ω | ≥1×1010 | 3.5 ×1010 |
| Hardness | A | ≥98 | 98(A) |
| Rubber Rail Pad | ||
| Technical Parameter | Unit | Value |
| Stiffness | KN | 90-130 |
| Hardness Shore A | ℃ | 72-80 degree |
| Electronic Resistance | Ω | ≥ 106 |
| Tensile Strength before Aging | Mpa | ≥12.5 |
| Elongation before Aging | % | ≥250 |
- Installation: Ensure precise alignment during installation to distribute loads evenly and maximize pad function.
- Replacement: Replace pads when permanent compression exceeds 20% or stiffness drops significantly (e.g., >15% change after fatigue cycles).
- Environmental Control: Increase inspection frequency in wet areas to prevent water damage (hydrolysis) and monitor elasticity in cold zones.
- Lubrication: Use silicone-based lubricants if needed, avoiding oils or chemicals that can degrade rubber.
GNEE RAIL provides exceptional elastic rail pads of various types for high-speed railways, normal-speed railways, and cranes. Especially the rail pads made of rubber, EVA, TPEE, and HDPE are very popular with customers. Our railway rubber pads fit the rails such as UIC54, UIC60, BS80lbs, BS100lbs, etc. We have more than 130set of machines in our production lines which can reach an annual production capacity of up to 2000, 000 pieces of rail pads. We offer a wide range of rail pads and other track materials at competitive prices.
