Steel Rail Type Overview

Sep 10, 2025 Leave a message

The Development of Steel Rails

Steel rails and other railway fasteners support the railway track system, including railway sleepers, rail joints, railroad spikes, rail clips and track bolts. The steel rails are always in an inconspicuous place for the train to crush and guide the train. The modern steel rail is made of steel, but rails were not like this at the beginning of their birth: at first it was a piece of square wood, and later the wood was covered with iron wrap. As the speed and weight of the train increase, the material of rails becomes steel step by step. In modern times, with the increase of train speed and axle weight, the improvement of the requirements for stability and the improvement of production and manufacturing processes, the classification of rails is becoming more and more detailed.

Classification by Weight, Standard and Manufacturing Process

The type of steel rail is usually divided by weight. For example, a 50 kg rail means a rail with a weight of 50 kg/m. There are 38 kg, 43 kg, 50 kg, 60 kg and 75 kg rails, and also 24 kg and 18 kg rails. Rails of 43 kg and above are generally called heavy rails, while steel rails below 43 kg are called light rails. There is a special kind of steel rail called the crane rail, which is used for crane railways. The light rail series covers 8 kg/m to 30 kg/m, the heavy rail series covers 38 kg/m to 60 kg/m, and the crane rail series covers QU70 to QU120.

For meeting various sizes of different countries around the world, steel rail can be processed according to international standards, such as GB, AREMA, BS, UIC, JIS, DIN and others. According to the manufacturing process, the steel rail is mainly divided into hot-rolled rails and heat-treated rails. All of the rails are produced by the hot rolling process; the heat-treated rails are reheated after the hot-rolling process, divided into online heat treatment and offline heat treatment. The online heat treatment is already mainstream, which is more energy-saving and more efficient.

Classification by Intensity

The steel rail is a complex alloy: in addition to the main component iron, there are five major elements, carbon, manganese, silicon, phosphorus and sulfur, and some trace elements that play a decisive role, such as vanadium, chromium and some rare earth elements. These elements merge with each other, and due to different manufacturing processes, they result in different physical properties of the steel rail. The composition and the heat treatment define the strength and wear resistance of the rail.

Classification by Rail Usage

High-speed railway: the steel rails in the station and the main line use 60 kg rails, but the steel rails of high-speed railways have higher requirements on flatness and various section size requirements. Ordinary railway: the depot and parking lot use 50 kg rails, and the main line uses 60 kg rails. Heavy load railway: characterized by large train axle and large total weight, this type of railway generally uses a specially manufactured 75 kg rail, which can greatly increase the service life. High-cold railway: the line that passes through the permafrost zone has high requirements for cold resistance and corrosion resistance, and uses a specially manufactured 60 kg rail. Subway: basically 50 kg rails for the parking lot and 60 kg rails for the main line. Tram: because of the small wheel size and small turning radius, the tram is easy to derail, so the grooved rail with its own guard rail is selected.

Selecting the Rail Type

The rail type is selected by the line category, the axle load, the speed and the environment. The selection determines the cost, the safety and the operational efficiency of the line, and the correct rail type is matched with the corresponding fastening system, fishplates and other components. For a new line, the rail section is a fundamental design decision that sets the capacity of the track for decades.

Frequently Asked Questions

How are steel rails classified by weight? Rails of 43 kg/m and above are heavy rails, and those below are light rails, with crane rails as a special type. Common sections include 38 kg, 43 kg, 50 kg, 60 kg and 75 kg rails, as well as 24 kg and 18 kg rails for lighter service.

What are the five major elements of rail steel? Carbon, manganese, silicon, phosphorus and sulfur, plus some trace elements that play a decisive role in the strength, hardness and weldability of the rail.

What is online heat treatment? Heat treatment performed during the rolling process, which is more energy-saving and efficient than separate treatment and improves the mechanical properties of the finished rail.

What rail is used on heavy-load lines? specially manufactured 75 kg rail used on heavy-load lines, designed for long service life under high axle loads and demanding operating conditions.

Why do trams use grooved rails? The grooved rail has its own guard rail to prevent derailment on small-radius curves, so it is used on tram and street-running tracks where the rail is embedded in the road surface.