What are the advantages of seamless lines

May 19, 2025 Leave a message

 

What are the advantages of seamless lines?

 

 

The stability of seamless lines is a mechanical balance problem. The balance factors are temperature pressure and original track bending on one side, and track frame stiffness and lateral resistance of the ballast bed on the other. The former is a factor that destroys stability, and the latter is a factor that maintains stability. The stability of seamless lines is the result of the growth and decline of both sides. The basic requirement for ensuring the stability of seamless lines is to increase the factors that maintain stability as much as possible and reduce the factors that destroy stability. The main measures are: improve the track frame stiffness of seamless lines, that is, use heavy rails, concrete sleepers and strong fasteners; increase the lateral resistance of the ballast bed; maintain a good line direction; eliminate hard bends in rails and strive to make welds straight; ensure that the roadbed has no slurry sinking and other diseases.

 

Railway lines laid with long rails. The commonly used standard rail lengths are 12.5 meters and 25 meters. 10 or 20 standard rails are first welded into 125-250m rails in the factory, and then transported to the laying site by a specially marshaled rail transport vehicle, welded into 1000-2000m long rails and laid on the line. Then, rollers are placed under the 1000-2000m long rails, and the entire section of long rails are welded into a seamless line by a contact welding machine, and the welding is released while releasing. Release according to the locking temperature. When the rail temperature is lower than the locking rail temperature during release, a hydraulic stretching machine is used to stretch according to the calculated results.

 

info-1200-1200

 

 

The advantage of seamless lines is that the joints are greatly reduced compared to ordinary lines, which not only saves a lot of joint parts and line maintenance work, but also reduces the vibration of the train joints, runs smoothly, and reduces noise. On the other hand, due to the reduction of vibration at the joints, the service life of line equipment and locomotives can be extended. Therefore, it is the direction of modern railway development.

 

The central issue of whether seamless lines can be used normally is how to control the thermal expansion and contraction caused by temperature changes. In order to prevent the rails from freely expanding and contracting due to temperature changes, rail connection parts and anti-climbing equipment are generally used to forcibly "lock" them on the sleepers. This generates an elongation or shortening force in the rails, collectively referred to as temperature force. In order to reduce temperature force, the season with the average of the highest and lowest temperatures in the area where the railway is located is usually used for locking, so that the temperature force of the rails is reduced to a minimum.

 

Seamless railways began to appear in the 1930s, but were not truly developed until the early 1950s. Now the number of seamless railways in countries around the world has exceeded 200,000 kilometers, accounting for about 20% of the total length of railways in the world. China's seamless railways began to be laid in 1958, and by the end of 1980, the mileage had reached more than 8,000 kilometers, accounting for about 16% of the official operating mileage. It can be foreseen that the new track structure of seamless railways will continue to develop.

 

 

 

info-750-750