A rail fish plate is a joint reinforcement device that prevents differential movement between adjacent rail sections, ensuring consistent track stiffness and reliable wheel–rail interaction. GNEE RAIL provides fish plates for GB light and heavy rails, UIC rails, DIN536 and QU crane rails, JIS rail profiles, AS1085 rails, BS11 standards, and AREMA/ASCE rails, with dimensional verification before shipment.
| Standard | Type | Length/Diameter | Weight /Material | |
|---|---|---|---|---|
| AREMA 2007 | 115RE | 4 hole-24" | 17.04Kg | 45# chemical |
| 115RE | 6 hole-36" | 25.56Kg | composition(%): | |
| 132-136RE | 4 hole-24" | 17.75Kg | C: 0.42-0.50 | |
| 132-136RE | 6 hole-36" | 26.63Kg | Mn: 0.50-0.80 | |
| UIC864 | UIC60 | 4 hole-630/Φ26 | 18.07Kg | Si: 0.17-0.37 |
| UIC60 | 4 hole-600/Φ28 | 17.47Kg | Cr: ≤0.25 | |
| UIC60 | 4 hole-630/Φ25 | 18.1Kg | P: ≤0.035 | |
| UIC54 | 4 hole | 14.34Kg | S: ≤0.035 | |
| UIC54 | 6 hole-800 | 19.94Kg | ||
| BS 47-1 | BS75R | 4 hole | 6.56Kg | |
| BS60A | 4 hole | 5.61Kg | ||
| BS80A | 4 hole | 6.5Kg | ||
| BS90A | 685.8/Φ26 | 13.23Kg | 50# chemical | |
| BS90A | 792.9/Φ26.2 | 15.34Kg | composition(%): | |
| BS100A | 4 hole | C: 0.62-0.70 | ||
| 90/91LB | 4 hole | 18.08Kg | Mn: 0.50-0.80 | |
| 90/91LB | 6 hole | 19.9Kg | Si: 0.17-0.37 | |
| AS | 50kg | 4 hole | 14.3Kg | Cr: ≤0.25 |
| 50kg | 6 hole | 19.5Kg | P: ≤0.035 | |
| S49 | 4 hole | 9.71Kg | S: ≤0.035 |
What is the Fish Plate Material and Why Does it Matter?
Fish plates (or joint bars) are primarily made from high-strength steel, such as Q235, 45#, or U71Mn, to provide necessary tensile strength, wear resistance, and durability for joining rail ends. They are crucial for maintaining track alignment, structural stability, and safety, allowing for heavy loads while withstanding thermal expansion and reducing vibration.
Key Fish Plate Materials and Their Significance
- High-Strength Steel (Q235, 45#, U71Mn): Standard, durable material for.
- Ductile Iron: Used for its high toughness and ability to handle.
- Alloy Steel: Specialized for extreme temperatures or corrosive environments like.
- Composite/Insulated Materials: Used to prevent electrical leakage for signalling.
| Material Type | Typical Grade / Designation | Chemical Composition (wt%) | Notes / Equivalent Standards |
| Carbon Structural Steel | Q235 (GB/T 700) | C: ≤0.22 | Common mild steel for general joint bars. Similar to ASTM A36, S235JR. |
| Si: ≤0.35 | |||
| Mn: 0.30-0.65 | |||
| P: ≤0.045 | |||
| S: ≤0.045 | |||
| Carbon Structural Steel | Q255 (GB/T 700) | C: 0.18-0.28 | Slightly higher strength than Q235. |
| Si: ≤0.35 | |||
| Mn: 0.40-0.70 | |||
| P: ≤0.045 | |||
| S: ≤0.045 | |||
| Medium Carbon Steel | 50Mn / 50BA (GOST 10779) | C: 0.47-0.55 | Classic high-strength fish plate steel. Widely used for mainline joints. |
| Si: 0.17-0.37 | |||
| Mn: 0.80-1.20 | |||
| P: ≤0.040 | |||
| S: ≤0.045 | |||
| Medium Carbon Steel | 55# (GB/T 699) | C: 0.52-0.60 | Standard medium carbon steel for demanding applications. Similar to AISI 1055. |
| Si: 0.17-0.37 | |||
| Mn: 0.50-0.80 | |||
| P: ≤0.035 | |||
| S: ≤0.035 | |||
| Alloy Steel | 42CrMo (GB/T 3077) | C: 0.38-0.45 | High-strength, high-toughness alloy for severe service. Similar to AISI 4140/4142. |
| Si: 0.17-0.37 | |||
| Mn: 0.50-0.80 | |||
| Cr: 0.90-1.20 | |||
| Mo: 0.15-0.25 | |||
| P: ≤0.035 | |||
| S: ≤0.035 | |||
| Spheroidal Graphite Cast Iron | QT450-10 (GB/T 1348) | C: 3.60-3.90 | Used in some traditional/joint kits for its castability and damping properties. Similar to EN-GJS-450-10. |
| Si: 2.00-3.00 | |||
| Mn: ≤0.50 | |||
| P: ≤0.07 | |||
| S: ≤0.015 | |||
| Mg: 0.03-0.06 (Nodulizer) | |||
| Insulating Composite Material | Epoxy Fiberglass / FRP | Base: Epoxy Resin | No metallic elements. Provides electrical insulation (Resistivity >10¹² Ω·cm), corrosion resistance. |
| Reinforcement: E-Glass Fiber (>60%) | |||
| Additives: Hardener, fillers (e.g., SiO₂) |
Which material is the most durable for rail joint bars?
The most durable materials for rail joint bars (fishplates) are high-strength alloy steels, specifically 50Mn (50 Manganese) and 42CrMo (Chromium-Molybdenum), which offer superior toughness, fatigue resistance, and durability under heavy loads. Heat-treated, hot-rolled carbon steel is also standard for high-performance rail connections.
Key Durable Materials:
- 50Mn Steel: Often used for heavy-duty, high-strength applications due to its high tensile strength and toughness.
- 42CrMo Steel: An alloy steel that provides superior wear resistance and durability, commonly used in demanding environments.
- Heat-Treated Carbon Steel: Medium to high carbon steels (such as 45#, 55#) that are quenched and tempered for increased strength.
- Microalloyed Steels: Advanced materials used for modern, high-load, and high-speed rail applications, providing enhanced fatigue resistance.
Founded in 2008, GNEE RAIL is a leading global manufacturer and supplier of railway components, specializing in high-quality rail fish plates (joint bars/splice bars) with strong production capacity and global service capabilities.
Our rail fish plate portfolio is comprehensive and compliant with international standards including UIC, AREMA, BS, DIN, and GB, covering light rail (8kg-30kg), heavy rail (38kg-75kg), and crane rail (QU70-QU120) systems. We offer diverse types such as insulated joint bars, bulged fish plates, and compromise rail joints,with precise specifications (4-hole/6-hole, 24-inch/36-inch), ensuring excellent mechanical performance.We uphold strict quality control supported by ISO 9001:2015 certification, an in-house inspection center, and third-party audits by SGS and BV. Our one-stop service includes customization, production, packaging, and after-sales support, tailored to clients' project needs.
Click here to obtain the detailed product catalog of GNEE RAIL.
