Description
Technical Parameters
Railway Fast Clips - Environmental Adaptability & Corrosion Performance
| Model | Core Material | Surface Protection | Operating Temp Range | Corrosion Resistance Test Result | Target Application Environment | Service Life Estimate |
|---|---|---|---|---|---|---|
| FC-15-Marine | 2Cr13 stainless steel | Electropolishing + PTFE coating | -30°C ~ 70°C | Marine salt spray: No red rust for 2000h | Coastal railways (near seaports) | 15–18 years |
| FC-17-Arctic | 60Si2MnCrCuA | Low-temp zinc plating (100μm) | -60°C ~ 50°C | -60°C cold impact: No cracks after 50 cycles | Arctic/permafrost railways (e.g., Siberian lines) | 10–12 years |
| FC-19-Industrial | 65MnCrMoA | Dacromet (15μm) + epoxy layer | -20°C ~ 80°C | Industrial dust: No coating peeling for 3000h | Heavy-industry zones (near steel plants) | 8–10 years |
| FC-13-Humid | 38Si7 | Double-layer Zn-Al alloy (80μm) | -40°C ~ 60°C | 95% RH humidity: No corrosion for 18 months | Tropical rainforest railways (e.g., Southeast Asia) | 12–14 years |
| FC-21-Desert | 55SiMnVB | Ceramic composite coating (30μm) | -50°C ~ 90°C | Sand abrasion: Wear loss ≤0.3mm/year | Desert railways (e.g., Middle East lines) | 9–11 years |
Railway Fast Clips - Dynamic Load Resistance & Failure Criteria
| Fast Clip Model | Rated Clamping Force | Dynamic Impact Resistance | Fatigue Life | Allowable Lateral Displacement | Failure Criteria |
|---|---|---|---|---|---|
| FC-15-Marine | 9–11 kN | ≥15 kN (single impact) | ≥3.2×10⁶ cycles (1.2×rated load) | ≤1.5mm (under 10kN lateral force) | Clamping force drop >20%; Visible cracks |
| FC-17-Arctic | 10–12 kN | ≥16 kN (single impact) | ≥3.5×10⁶ cycles (1.2×rated load) | ≤1.3mm (under 10kN lateral force) | Cold brittleness fracture; Deformation >2mm |
| FC-19-Industrial | 12–14 kN | ≥18 kN (single impact) | ≥4.0×10⁶ cycles (1.2×rated load) | ≤1.0mm (under 12kN lateral force) | Coating loss >30%; Elasticity loss >15% |
| FC-13-Humid | 8–10 kN | ≥14 kN (single impact) | ≥2.8×10⁶ cycles (1.2×rated load) | ≤1.6mm (under 8kN lateral force) | Corrosion-induced clamping force drop >25% |
| FC-21-Desert | 13–15 kN | ≥19 kN (single impact) | ≥3.8×10⁶ cycles (1.2×rated load) | ≤1.2mm (under 12kN lateral force) | Abrasion-induced thickness reduction >10% |
gnee-professional supplier
Hot Tags: fastening rail fast clips, China fastening rail fast clips manufacturers, suppliers, factory, rail clip bending tools, rail clip bolting, rail clip ceramic coating, rail clip tightening tools, rail track clips, rail clip smoothness
