What Is a Railroad Coach Screw Spike
A railroad coach screw spike is a high-strength fastener used in railway fastening systems, widely applied in wooden, concrete and composite sleeper track assemblies. The 5.6 grade M24 coach screw spike is known for its superior pull-out resistance and long service life. It ensures a secure connection between the sleeper and the rail, preventing displacement and loosening under repeated train loads. The designation 5.6 means that the nominal tensile strength is 500 MPa and the yield ratio is 0.6, giving a minimum yield strength of 300 MPa.
Mechanical Properties of Grade 5.6
The mechanical properties of fasteners are classified by property class according to ISO 898-1. For the 5.6 class, the minimum tensile strength is 500 MPa and the minimum yield strength is 300 MPa, with an elongation of at least 20 percent. The table below compares the common property classes used for railway screw spikes.
| Property Class | Min Tensile Strength MPa | Min Yield Strength MPa | Typical Use |
|---|---|---|---|
| 4.6 | 400 | 240 | General fastening |
| 5.6 | 500 | 300 | Coach screws and sleeper screws |
| 8.8 | 800 | 640 | High-strength track bolts |
| 10.9 | 1000 | 900 | Heavy-duty fastening |
| 12.9 | 1200 | 1080 | Special high-strength applications |
Available Materials
Coach screw spikes can be manufactured from a wide range of materials depending on the service environment and strength requirement.
| Material Group | Examples |
|---|---|
| Stainless steel | SS302, SS303, SS304, SS316, SS410, SS420 |
| Carbon steel | C1006, C1010, C1018, C1022, C1035K, C1045 |
| Alloy steel | SCM435, 10B21, C10B33 |
| Brass | C36000, C37700, C38500, C27200, C28000 |
| Bronze | C51000, C52100, C54400 |
| Iron | 1213, 12L14, 1215 |
| Aluminum | Al6061, Al6063 |
Surface Finishing Options
Surface finishing protects the spike against corrosion and can be selected according to the track environment. Common finishes include zinc plating, nickel plating, tin plating, passivation, sandblasting and anodizing, chromate conversion, polishing, electro painting, black anodize, plain finish, chrome plating and hot deep galvanizing. Heat treatment processes such as tempering, hardening, spheroidizing and stress relieving are applied to adjust the mechanical properties of the finished product.
Materials and Surface Finishing Options
Railroad screw spikes are mainly made through hot forging, and the threads are formed by hot rolling with special threading machines. Metric threads, BS, BSW, TR thread and round threads can be produced. Manufacture follows national and railway standards including the Chinese GB and TB series, AREA, UIC, BS, DIN, ASTM and AS requirements, and heads and sizes can be produced to customer drawings and samples.
The 5.6 grade M24 coach screw spike suits timber sleepers, concrete sleepers and composite sleepers where high pull-out resistance is required. When selecting a spike, consider the sleeper material, the rail fastening system, the corrosive level of the environment and the required thread type. For coastal or tunnel environments, stainless steel or heavy galvanized finishes are recommended, while for standard mainline use, heat treated carbon steel with zinc plating offers a balanced solution.
Frequently Asked Questions
What does the 5.6 grade designation mean? It means the nominal tensile strength is 500 MPa with a yield ratio of 0.6, so the minimum yield strength is 300 MPa.
Where is the M24 coach screw spike used? It is used in wooden, concrete and composite sleeper track assemblies to secure the rail and prevent displacement and loosening.
Which materials are available for coach screw spikes? Stainless steel, carbon steel, alloy steel, brass, bronze, iron and aluminum grades are available depending on the application.
What surface finishes can be applied? Zinc plating, nickel plating, hot deep galvanizing, chromate, passivation, black anodize, painting and other finishes can be specified.
Which standards apply to railroad screw spikes? Manufacturing follows GB, TB, AREA, UIC, BS, DIN, ASTM and AS standards, with metric and imperial threads available.
How are the threads of screw spikes produced? The threads are formed by hot rolling with special threading machines after hot forging of the spike body.






