E1609 E1809 E2055 E2091 Elastic Rail Clips: Specifications and Selection

Oct 27, 2025 Leave a message

What Is an Elastic Rail Clip

An elastic rail clip is a core component of railway fastening systems. It fixes the rail to the underlying base plate and sleeper and prevents the rail from moving, lifting or turning under traffic. Because the clip works elastically, it maintains a constant clamping force on the rail foot while absorbing the dynamic loads generated by passing trains. E-type clips are one of the most widely used elastic fastening elements in main line, heavy haul and urban rail networks.

E-Type Clip Series and Specifications

The E-type elastic rail clip series includes E1609, E1809, E1813, E2001, E2007, E2009, E2039, E2055, E2056 and E2063 models. The main series values are a clamping load of at least 950 kg per clip, a hardness range of 44 to 48 HRC and a spring steel material of 60Si2MnA. Unit weights start at 0.43 kg for the 16 mm clip and reach 0.80 kg for the 20 mm series. The E1609 uses 16 mm wire, the E1813 uses 18 mm wire and the 20 mm series covers E2001, E2009, E2039, E2007, E2055, E2056 and E2063.

Spring Steel Materials and Composition

Elastic rail clips are manufactured from high quality spring steel, normally 60Si2MnA, 60Si2CrA, 55Si2Mn or 38Si7. The typical chemical composition of 60Si2MnA is carbon 0.56 to 0.64 percent, manganese 0.60 to 0.90 percent, silicon 1.60 to 2.00 percent and chromium up to 0.35 percent, with phosphorus and sulfur each limited to 0.03 percent. Heat treatment and controlled processing give the finished clip high tensile strength, good hardness and stable fatigue performance under bending, torsion and corrosion.

Surface Treatment and Quality Control

Surface options include plain oiled, color painted, oxide black, zinc plated and hot dip galvanized finishes, with oxide black being the most commonly specified choice. Production inspection uses Brinell and Rockwell hardness testing, carbon and sulfur analysis, impact testing, metallographic examination and fatigue testing to confirm that every batch meets the specification. Standard specifications include DIN 17221, BS 970 and GB/T 1222, and finished clips can be produced to UIC, AREMA or customer drawing requirements.

Packaging and Logistics

Clips are packed in 25 kg double-layer woven bags on fumigation-free timber pallets, with 36 bags per pallet and 20 pallets per 20 foot container. This packing protects the surface finish during sea transport and simplifies handling at the destination warehouse. Buyers should confirm the packing method for large orders so that unloading and distribution match local site practice.

Selection Considerations and Common Misconceptions

Choose the clip model according to rail profile, sleeper type, base plate design and the required toe load. The 16 mm and 18 mm clips suit lighter fastening assemblies, while the 20 mm series provides higher clamping force for heavy haul and high speed lines. Confirm the hardness and fatigue requirements for the operating environment and specify the surface finish from the local climate. Custom dimensions and higher strength materials can be produced for special projects.

A common error is assuming that any clip from the E series can replace another without checking the rail foot geometry. Each model has a defined wire diameter and clamping range. Another misconception is that a painted surface indicates poor quality; color painting is a valid protective finish. It is also wrong to judge clip quality by appearance alone, because hardness and fatigue life are the properties that determine service life.

Frequently Asked Questions

What is the function of an E-type rail clip? The E-type clip holds the rail against the base plate and sleeper with a constant elastic clamping force and resists rail movement, lifting and rotation.

What clamping load do these clips provide? The series is rated at a minimum clamping load of 950 kg per clip with a hardness of 44 to 48 HRC.

Which material is used for E-type clips? The standard material is 60Si2MnA spring steel, with 60Si2CrA, 55Si2Mn and 38Si7 available for special requirements.

What is the difference between the E1609 and the 20 mm series clips? The E1609 uses 16 mm wire and weighs 0.43 kg, while the 20 mm series including E2001, E2009 and E2055 uses 20 mm wire and weighs 0.80 kg per piece.

What surface treatments are available? Plain oiled, color painted, oxide black, zinc plated and hot dip galvanized finishes are available, with oxide black the most common selection.

Can clips be manufactured to a customer drawing? Yes, clips can be produced to customer drawings and samples, including special dimensions and higher strength materials.