Material Selection Guide for Track Bolts

Jul 02, 2025 Leave a message

The Role of Track Bolts in the Track Structure

Track bolts are fasteners used to connect components of the railway or track system. Their main function is to firmly connect various track components, such as sleepers, rails and fishplates, to form a stable and continuous track surface that ensures smooth and safe train operation. The bolts are used together with nuts, track plates or sleeper fasteners to form an overall structure that reduces the risk of track deviation and deformation.

Required Properties of Track Bolt Materials

A good track bolt material must combine high strength, corrosion resistance, fatigue resistance and good wear resistance. High strength ensures that the track connection does not loosen or break from excessive force when a train passes at high speed. Corrosion resistance ensures that the fastener does not fail from rust under different climatic conditions. Fatigue resistance enables the bolt to withstand long-term repeated loading and extends its service life. The overall design pursues a reasonable structure and reliable fastening to ensure the stability of the track.

Common Material Grades

High-strength steel is the core material for track bolts, usually carbon steel or alloy steel. The table below lists typical grades and their characteristics.

Material Type Typical Use
Q235 Carbon steel Light-duty fastening and general components
35 steel Medium carbon steel General track bolts with moderate strength
45 steel Medium carbon steel Common choice for track and fish bolts
40Cr Alloy steel High-strength bolts requiring hardenability
35CrMoA Alloy steel Heavy-duty bolts with high strength and toughness

Heat Treatment of Track Bolts

Heat treatment processes such as quenching and tempering are used to improve the mechanical properties of the steel so that the bolt is not easily deformed or broken under load. Quenching increases hardness and strength, while tempering restores toughness and reduces internal stress. The combination of quenching and tempering, known as hardening and tempering treatment, is the standard route for high-strength track bolts, producing a fine-grained structure with a good balance of strength and ductility.

Surface Protection Options

To resist environmental corrosion, the bolt surface is protected by galvanizing, painting or other anti-corrosion treatments. Hot dip galvanizing gives a thick zinc layer that suits outdoor and coastal service, while electro galvanizing provides a thinner, smoother coating for general use. Black oxide, oiled finishes and Dacromet type coatings are used where specific requirements apply, such as hydrogen embrittlement resistance or dimensional tolerance control.

Selection by Application

For standard mainline fishplate joints, medium carbon steel such as 45 steel with a protective coating gives a reliable and economical solution. For heavy-haul lines, turnouts and high-speed track, alloy steel grades with quenching and tempering are preferred to resist fatigue and impact. For coastal, tunnel or chemically aggressive environments, choose a material and coating combination with strong corrosion resistance, and consider stainless steel for critical locations where maintenance access is limited.

Frequently Asked Questions

What properties should track bolt materials have? Track bolt materials should combine high strength, corrosion resistance, fatigue resistance and good wear resistance to keep the connection reliable over the track service life.

Which steel is commonly used for track bolts? Carbon steels such as Q235, 35 steel and 45 steel are common for general service, and alloy steels such as 40Cr and 35CrMoA are used for high-strength applications.

Why is heat treatment applied to track bolts? Quenching and tempering improve strength and toughness, so the bolt resists deformation and breakage under repeated load.

How are track bolts protected from corrosion? Galvanizing, painting and other anti-corrosion coatings protect the bolt surface, with hot-dip galvanizing preferred for outdoor and coastal service.

What is the best material for heavy-haul lines? alloy steel grades such as 40Cr and 35CrMoA with quenching and tempering are the best choice for heavy-haul, turnout and high-speed track applications.

Why is fatigue resistance important for track bolts? Track bolts are loaded repeatedly by every passing train, so fatigue resistance prevents premature cracking and failure over long service periods.