Precautions for installing rails

Apr 23, 2025 Leave a message

 

 

Precautions for installing rails

 

 

Rail installation is a crucial link in railway construction, and its installation quality is directly related to the safety and stability of train operation. The following are the key points to pay attention to when installing rails, which are expressed and summarized in points in combination with the relevant figures and information in the reference article:

 

I. Overall requirements

 

Comply with national technical standards: The installation of rails must strictly comply with relevant national technical standards and specifications to ensure that the installation quality meets the standards.

 

Construction strictly in accordance with the design drawings: The installation of rails must be carried out strictly in accordance with the design drawings, and the design must not be changed at will to ensure that the geometric parameters and flatness of the track meet the requirements.

 

II. Construction method

 

Clean the foundation: The foundation must be cleaned before construction to ensure that the foundation is flat, dry, and free of debris, providing good basic conditions for rail installation.

 

Positioning and sand piling: Determine the track position by laser measurement and other methods, and pile sand at the track installation position to correct the track elevation.

 

Installation adjustment: Use special equipment to install rails to ensure that the track's lateral position, longitudinal slope, elevation and other indicators meet the design requirements. During implementation, the track should be adjusted according to geological conditions and engineering requirements.

 

Connection and fixation: The connection of the rails is fixed by bolts to ensure a firm connection. The bolt tightening force should be uniform and not too tight or too loose. The fastening of the connector is effective, and it is strictly forbidden to grind the sleepers with ropes.

 

III. Quality control

 

Raw material inspection: The raw materials of the rails must meet national standards and require raw material inspection, including chemical composition, physical properties, mechanical properties, etc.

 

Welding quality: The welding of the rails must meet the requirements of relevant specifications to ensure the strength and quality of the welds. After welding is completed, necessary inspections and acceptance should be carried out.

 

Packaging and transportation: During the quality control process, it is necessary to ensure the correct packaging and transportation of the rails to avoid damage during transportation.

 

 

info-750-750