Two Types of Railway Pads: Grooved and Studded, and Their Materials

Aug 25, 2025 Leave a message

Rail pads are elastic components inserted between the rail and the baseplate or sleeper in a rail fastening system. They were introduced because of their resilience and viscoelastic behavior. Rail pads attenuate the dynamic stresses generated by wheels on the rail during normal and irregular movement, reduce the risk of fatigue cracking in sleepers, and contribute to lower track maintenance costs over the life of the line.

Two Main Types of Rail Pads

Based on surface characteristics, rail pads are divided into two categories. Studded rail pads carry a pattern of studs or projections on one or both faces, which increases vertical flexibility and improves contact with the rail base. Grooved rail pads have machined grooves that control stiffness and allow water and debris to escape from the rail seat. Both types are available in thicknesses and drawings matched to the fastening system and rail section.

Materials Used for Railway Pads

Rail pads are manufactured from rubber, EVA, TPEE, and HDPE, depending on the stiffness, insulation, and durability requirements of the line. Rubber pads are suitable for rails including UIC54, UIC60, BS80 lbs, and BS100 lbs, and provide good elasticity and damping. EVA pads combine light weight with high elongation and electrical insulation. HDPE pads offer higher hardness and wear resistance for demanding service conditions.

Typical Technical Values

Parameter EVA Pad HDPE Pad Rubber Pad
Density 0.95 g/cm3 0.95 g/cm3 Not specified
Tensile Strength 16 MPa 19 MPa 12.5 MPa before aging
Elongation 550 percent 150 percent 250 percent before aging
Hardness 92 Shore A 98 Shore A 72 to 80 Shore A
Electrical Resistance 5.0 x 10^10 ohm 3.5 x 10^10 ohm 10^6 ohm or more
Stiffness Not specified Not specified 90 to 130 kN

Grooved rubber rail pads are commonly produced to RDSO drawing numbers for 60 kg rail, with a hardness of 75 to 85 Shore A and a rectangular shape. The drawings cover the main RDSO series used in Indian Railways track construction.

Application and Selection Guidance

GNEE RAILWAY RAILWAYL supplies elastic rail pads for high speed railways, conventional railways, and crane applications. Select the pad material according to the sleeper type, the fastening system, and the required electrical insulation between rail and sleeper. Rubber pads are preferred where damping and resilience matter most, while EVA and HDPE pads suit systems that demand stable stiffness and higher hardness. Always confirm the drawing number, thickness, and hole pattern against the fastening assembly before ordering.

Quality Control and Inspection

Rail pad suppliers should apply strict quality control at every stage from rubber compounding to final inspection. Finished pads are checked for hardness, tensile strength, elongation, insulation resistance, and dimensional accuracy. A full set of inspection instruments should be used so that every pad meets the customers requirements before shipment.

Frequently Asked Questions

What is the function of a rail pad? rail pad sits between the rail and the baseplate or sleeper to absorb dynamic wheel loads, reduce sleeper fatigue, dampen vibration, and lower track maintenance costs.

What are the two main types of rail pads? Rail pads are classified by surface as studded rail pads and grooved rail pads.

Which materials are used to make rail pads? Common materials are rubber, EVA, TPEE, and HDPE, each offering a different balance of elasticity, hardness, and insulation.

Which rail sections can rubber rail pads serve? Rubber railway pads are suitable for rails including UIC54, UIC60, BS80 lbs, and BS100 lbs, among others.

What hardness do grooved rubber rail pads have? Grooved rubber rail pads typically have a hardness of 75 to 85 Shore A.