Rail Spike Types
Railroad spikes vary by material and design. Dog spikes are the common, traditional type used for wooden ties, while screw spikes offer superior holding power against vibration. Other types include elastic spikes used in high-traffic areas such as bridges and tunnels, which are more expensive but more durable. The material is also a key characteristic. Low-carbon steel is ductile and easy to work, while high-carbon steel provides greater strength and hardness, so a blend or high-carbon steel is often used for demanding applications.
Dog Spike Characteristics
Dog spikes have an L-shaped or hook head and a square shank, and sometimes carry two lugs that make the head resemble a dog head. They are widely used for fastening rails to wooden sleepers, especially on lighter rails. Dog spikes are less expensive than other types and can be effective, but they may be less resistant to loosening from vibration compared with screw spikes.
| Specification | Material | Surface | Standard |
|---|---|---|---|
| 5/8 x 6 inch | A3, Q235, 45, 55 steel | Per customer requirements | Per drawings or samples |
| 9/16 x 5-1/2 inch | A3, Q235, 45, 55 steel | Per customer requirements | Per drawings or samples |
| 3/8 x 3-1/2 inch | A3, Q235, 45, 55 steel | Per customer requirements | Per drawings or samples |
| 1/2 x 3-1/2 inch | A3, Q235, 45, 55 steel | Per customer requirements | Per drawings or samples |
Screw Spike Characteristics
Screw spikes feature a helical thread that gives a more secure grip in the sleeper. They are used in applications where greater holding power is required to prevent the spike from loosening due to vibration, and they provide enhanced stability and resistance to loosening, helping to maintain accurate track spacing. The table below shows typical sleeper screw products in the SS series.
| Product | Specification | Weight kg | Material | Surface | Standard |
|---|---|---|---|---|---|
| Ss 1/130 | M22 x 130 | 0.451 | Q235, 45, 55 steel | Zinc, plain, black oil | UIC, AREMA, JIS, GB |
| Ss 1/150 | M22 x 150 | 0.478 | Q235, 45, 55 steel | Zinc, plain, black oil | UIC, AREMA, JIS, GB |
| Ss 2/180 | M22 x 180 | 0.59 | Q235, 45, 55 steel | Zinc, plain, black oil | UIC, AREMA, JIS, GB |
Material Differences Between Spike Types
The holding power and service life of a spike depend strongly on the material grade. Low-carbon grades such as Q235 are easy to form and weld and are suitable for general service. Medium carbon grades such as 45 steel provide better strength and are common for screw spikes. High-strength alloy grades are used where maximum pull-out resistance and fatigue life are required, for example on curves, bridges and turnouts.
How to Choose the Right Spike.
Choose dog spikes for lighter rails on wooden sleepers where cost is the main concern and vibration levels are moderate. Choose screw spikes where vibration is strong, where track spacing accuracy must be maintained, or where the sleeper material makes threaded anchoring more reliable. For bridges, tunnels and heavy-haul corridors, consider elastic spike systems and higher strength materials to resist repeated loading and loosening.
Common Misconceptions
One misconception is that dog spikes and screw spikes are interchangeable. Their holding mechanisms differ, and substituting one for the other without redesign can reduce fastening reliability. Another misconception is that harder steel is always better. Excessively hard spikes can be brittle under impact and may crack during driving, so the material must match the sleeper type and installation method.
Frequently Asked Questions
What is the difference between a dog spike and a screw spike? dog spike has an L-shaped head and square shank and is driven into the sleeper, while a screw spike has a helical thread that is screwed in for a stronger grip.
Which spike type has better holding power? Screw spikes provide greater holding power and better resistance to loosening from vibration than dog spikes.
Where are dog spikes mainly used? Dog spikes are mainly used for fastening rails to wooden sleepers, especially on lighter rail sections.
What materials are used for rail spikes? Common materials include Q235, 45 and 55 steel grades, with high-strength alloy grades for demanding service.
What standards apply to sleeper screws? Sleeper screws are manufactured to UIC, AREMA, JIS and GB standards or to customer drawings.
Can spikes be customized? Yes, specifications, materials, surfaces and standards can be arranged according to customer requirements and samples.






